OBTEGO P-3 is used as densifier and hardener on trowelled concrete as well as on grinded concrete between the steps. The product penetrates deep into the surface. The water absorption is reduced, the surface diffusion remains open. The following properties are present after treatment with OBTEGO P-3:Improved abrasion resistance, dust-free, impermeable and more resistance on the surface. Purpose / […]
Highly reactive hybrid silicate with a basic protection against stains Purpose / Properties OBTEGO R-30 causes a silicate of concrete surfaces and penetrates deep into the surface. The hybrid-silica also reduces the penetration of liquids and dirt. The water absorption is reduced, the surface diffusion remains open. Surfaces are easier to clean and the gloss
Waterborne protective sealer for concrete floors Purpose / Properties OBTEGO R-50 reduces the penetration of aqueous liquids, grease, oils and other dirt. The product is easy to apply and imparts high gloss when burnished. The effectiveness depends on the material and absorption of the surface. Depending on the material and surface treatment, it can also
Solvent-borne, silane-based special sealer with an excellent water and oil repellent effect Purpose / Properties OBTEGO R-400 reduces the penetration of aqueous liquids, grease, oils, and other dirt. The productpenetrates deep into the surface and causes a color deepening. The water absorption is strongly reduced, while the water vapor permeability is only marginally affected. The
Water born, silane/siloxane based special sealer with an excellent water and oil repellent effect. Purpose / Properties OBTEGO® R-405 reduces the penetration of aqueous liquids, grease, oils, and other dirt. The water absorption is strongly reduced, while the water vapor permeability is only marginally affected. The active ingredients are UV-resistant and non-yellowing. Packaging Unit (PU)
Liquid compound based on various silicates and polymers, which is used together with grinding dust, as pore filler for grinded floors and screeds to close the pores/holes. Purpose / Properties OBTEGO SP-100 is mixed with the grinding dust of the surface at the construction site, which gives the finished mixture the color of the respective surface. Due
Universal one-component polyurethane sealant Linolit_PU 40 FC is designed for sealing and sealing joints of building structures. It is used in structures subjected to moderate mechanical influences (weight, wind and vibration loads, water pressure, etc.). It is used in construction and repair of industrial and civil facilities. Features: high-tech and easy to use; polymerizes under
Universal sealant Linolit_PU 40 FC Read More »
A compound for elimination of small and medium pores and hairline cracks on the surface of all types of concrete bases. Linolit_PCF concrete sealant eliminates vulnerability of the monolith associated with the inevitable porosity of its structure, regardless of the composition of the thixotropic mixture and the type of fillers, the base needs additional processing.
Pore and crack sealant Linolit_PCF Read More »
Concrete base hardener Linolit_FС3, produced by Linolit Company. Linolit_FC3 chemical concrete floor hardener is an aqueous solution based on lithium silicate. A0 monolithic floor contains a reinforcing mesh or rods at its base, the materials of which are subject to oxidation when interacting with carbon dioxide. Lithium impregnation neutralizes the reaction, reducing the acidity of
Concrete base hardener Linolit_FС3 Read More »
Polymer compound for fast filling of seams and cracks, as well as repair of defects up to 80 mm deep on the surface of concrete and mosaic floors (horizontal surface). Linolit ® 12 seam filler is a compound for fast sealing (hermitization) of technological external elements in the concrete structure, as well as for prompt
Seam filler Linolit 12 Read More »
